We have compiled a list of Frequently Asked Questions to answer all your quick and short Di2 questions. Do you think we’re missing a question? Let us know!
The e-Tube app is available for Windows, iOS and Android. The download links and store pages are:
E-Tube is the name Shimano gave to their Di2 electronic communication system. It consists of electric wires, components, plugs and its own communication protocol (using CANBUS).
We have written a couple of posts on Synchronized shifting – have a look at How to customize synchronized shifting, Synchro-shift how does it work and How to use the mobile apps to set up synchronized shifting.
Chain rub can happen to the best of us. The fix for this depends on where the rubbing occurs. If the chain rubs in either your lightest or hardest gears, double check the top/low limits for your front derailleur. If the rubbing occurs anywhere else you may have to try micro-adjusting or play around with the rear derailleur settings.
The front derailleur low/top limit settings depend on your Di2 series. We have added guides for both 1-bolt and 2 adjustment bolt front derailleurs to our installation guides.
If the above links do not help you resolve the issue, please send us an email and we’ll try to help the best we can.
You can change synchronized shifting mode while on the bike easily. Just double-press the button on your junction box and you will change to the next shift mode.
The LED that comes on indicates what mode you’re currently in.
The synchronized-shifting compatible series are:
- Ultegra 6870
- Ultegra R8050
- DURA-ACE R9000
- DURA-ACE R915
- XTR M9050
- Deore XT M8050
We recommend you use Shimano’s TL-EW02 cable plug tool to connect and disconnect your components. They make it so much easier to connect things properly – you should feel and hear a click when connecting your wires.
You probably didn’t get a manual with your bike, but you can find Shimano’s own manual right on their website: https://si.shimano.com. We’ve mirrored the files for you:
- Ultegra Di2 6770 manual
- Ultegra Di2 6870 manual
- Ultegra Di2 R8050 manual
- GRX RX815 Di2 manual
- DURA-ACE 9070 manual
- DURA-ACE R9150 manual
Besides hosting the official manuals we’ve also written a Di2 getting started guide with all the information you need as a new Di2 user.
If you’ve forgotten your e-Tube wireless passkey you can reset it by connecting your bike to a computer and running the e-Tube windows application. Read the post on changing your wireless passkey using a Windows computer.
When Shimano introduced Synchronized shifting june 2016 they also changed the behaviour of the Junction A. When you check the Di2 battery level the LEDs on your junction box will first indicate the battery level, turn off and then illuminate again to indicate the selected synchro-shift mode. The different modes are:
- Red and green LEDs turn on for two seconds – manual shift
- Red and green blink two times – synchronized shift mode 1
- Red and green blink three times – synchronized shift mode 2
Has your bike suddenly started doing this, even though you’ve had it for a long time? Your junction A firmware has probably been updated by either you or your local bike shop.
Note that this behavior will always trigger when you check the battery level, even if your bike doesn’t support synchronized shifting.
(provided your firmware is up-to-date)
First things first: make sure your bike has a Wireless Unit (EW-WU110/EW-WU111). It is an optional component and most Di2 bikes do not ship with this unit installed.
In order to enable you to connect to the bike, press the button on your junction box for about two seconds (until the red/green lights start flashing). If this doesn’t happen at all, try updating your firmware. The SM-EW90 junction box (that’s the below-the-stem version) should be on at least 3.0.4. Connect the bike to a windows pc to make sure it is up to date.
If this does not solve your problem, please contact us and we’ll try to help the best we can!
Unfortunately you can’t! Shimano has not made the e-Tube project software available for Apple (Macbook) devices. This can be a real problem to those wanting to update their Di2 firmware. If this is you, we suggest the following workarounds:
- Take your bike and your SM-BCR2 charger to a friend and hook it up to their Windows laptop/pc
- Take your bike to a good Local Bike Shop (LBS) and ask them to update your Di2 firmware. They will be glad to help at low or even no cost
- Install the e-Tube project mobile app (if you have the Wireless Unit) and update firmware that way. Be aware you may need to reset the system.
Yes you can! This is done quite a lot by Di2 users who want to run a 1x setup only (no front derailleur) – on their gravel bikes for example. Have a look at the compability charts – they list which derailleur models are compatible with which shifters.
Your rear derailleur has probably gone into crash mode. This means the motor has disengaged from the cage, blocking any further shifting. In order to restore normal operation, first make sure your rear derailleur and derailleur hanger are not damaged. Then get on your bike and press and hold the button on your junction box for 5 seconds until a red light flashes.
The rear derailleur will go through all the gears now, so make sure sure you spin the cranks until it’s done. Once it has gone through all the gears you’re done and ready to get back to enjoying your ride.
Yep! You can use the MT800 digital display with BlueTooth instead of a Junction A (internal/external). It has three e-Tube ports, shows the battery level, shifting and suspension modes and gear position.
Have a look at the compatibility chart for more information on mixing road and mountain bike components.
Press and hold any of your shifting buttons for at least half a second. The colour and the amount of flashes of the junction box LED indicates how much charge is left.
Of course the LEDs cannot flash if the battery is completely empty, which is why a more accurate approximation would be:
- Green for two seconds: more than 75%
- Green, flashing 5 times: 50% – 75%
- Red for 2 seconds: 25% – 50%
- Red, flashing 5 times: less than 25%
Please note that when you have 10% or less charge remaining, the front shifting will cease to function. You’ll be stuck in the chainring you selected.
Depending on your firmware version, it’ll also display flashing lights to indicate the shifting mode you’re in.
A Shimano BT-DN110 battery should last for at least 2000km. When used normally you can expect to get about 2500-3000km of riding out of a single charge, depending on how often you shift.
No, you can’t. While most Di2 hardware can be mixed across different series, you cannot use 7970 with any other, newer, Di2 hardware. This is because it uses a different wiring system (4/5-conductor vs 2-conductor e-Tube).